Remote ID Instructions

Boot up all avionics by powering on the drone with the included flight batteries

Once the Remote ID unit has passed initial preflight selt-test (PFST), connect to the Remote ID with the included USB-C cable

Follow the full Remote ID instructions included with your drone for all PFST indicators

Connect the USB-C cable to any computing device

Once connected, the Remote ID will be visible as a drive containing ODID.txt

Using any text editor, modify the contents of the ODID.txt and save the file

Disconnect the USB cable and power cycle the drone. ODID is now updated. The new value will be broadcast until such a change is made again.