3 - Assembly

Use the provided 3/16 Ball Driver to secure arm mount screws (2 per arm)

Use the provided 3/32 Ball Driver to secure the landing gear tube to the landing gear mount

Securely connect the arm terminals to the frame side terminals

Ensure that the red safety clip is inserted

Note: the safety clip will connect between the red and black terminals

Secure the main battery into the battery tray using the attached velcro straps

Do not power on the plane at this step!

Check C2 antennas

Check that each antenna is securely fastened

Ensure that the motors spin freely by hand

Check each lower motor mount screw for blue torque indicator (torque indicator should be intact with no cracking)

Ensure that the propeller blade direction matches the arm root

Clockwise propellers will have the one tab pointing to the right

Counter Clockwise propellers will have the one tab pointing to the left

Check the integrity of torque indicator for any fastener on the drone on which indicator came installed